Ultimate Watch Guide

 


Watch Dimensions


 For your reference, we include the dimensions of each watch in the description section of the product page. Below are some diagrams to display where our measurements are taken. If you have any questions, or would like some help with your measurements, feel free to contact us and our sales team will be more than happy to help.

 
 

Watch Technical Specifications

 

Understanding Watch Movements

Automatic Watches:
Automatic Watches are powered by the everyday movement of your wrist. The movement is converted in to energy that applies tension to a wound mainspring. These watches do not need to be charged or manually wound and do not require sunlight to work.

Eco-Drive Watches:
Eco-Drive watches are Citizen's version of solar powered watches. These watches take charge from almost any kind of light. This makes them extremely useful in almost any environment. They require no need to be wound or to have their battery replaced. Simply expose the watch face to a light source and the watch will be charged over time.

Mechanical Watches:
Mechanical watches are traditionally wound via the crown. This winds up the mainspring mechanism inside and the watch is powered by the stored up energy. These watches need winding every so often to keep the energy needed to keep the movement going.
 
Quartz Watches:
Quartz watches are by far the most common type of watched. The movement is simply powered by a battery meaning that the battery must be changed if the watch runs out of power to function.

Solar Watches:
Solar watches are similar to Eco-Drive. Solar simply means the watch face draws power from light meaning that the watch is charged all of the time unless place in an area with no light. Solar watches keep their charge for a limited time so will need sun light intermittently.

Kinetic Watches:
Very similar to automatic watches kinetic watches work in the same way, however kinetic watches store power for much longer because the energy is converted in to electricity and stored in a battery. This movement is considered a half way point between mechanical and quartz. The battery of a kinetic watch will need replacing far less often than a quartz watch.

 
 
 

Water Resistance Classification

Watches are often classified by watch manufacturers by their degree of water resistance which, due to the absence of official classification standards, roughly translates to the following (1 metre ≈ 3.29 feet)
 

Water resistance rating

Suitability

Remarks

Water Resistant 
3 ATM or 30m

Suitable for everyday use. Splash/rain resistant. NOT suitable for showering, bathing, swimming, snorkeling, water related work and fishing.

NOT suitable for diving.

Water Resistant
5 ATM or 50m

Suitable for swimming, white water rafting, non-snorkeling water related work, and fishing.

NOT suitable for diving.

Water Resistant
10 ATM or 100m

Suitable for recreational surfing, swimming, snorkeling, sailing and water sports.

NOT suitable for diving.

Water Resistant
 20 ATM or 200m

Suitable for professional marine activity, serious surface water sports and skin diving.

Suitable for skin diving.

Diver's 100m

Minimum ISO standard (ISO 6425) for scuba diving at depths NOT suitable for saturation diving.

Diver's 100 m and 150 m watches are generally old(er) watches.

Diver's 200m or 300m

Suitable for scuba diving at depths NOT suitable for saturation diving.

Typical ratings for contemporary diver's watches.

Diver's 300+ m for mixed-gas diving

Suitable for saturation diving (helium enriched environment).

Watches designed for mixed-gas diving will have the DIVER’S WATCH L M FOR MIXED-GAS DIVING additional marking to point this out.

*Manufacturers water resistance classifications are interpretations and are not part of any ISO standard definition.